Dual Channel Photodiode Amplifier
Versatile, multi- configurable amplification of currents from pA range up to μA range. Well suited for experimental setup and small series.
MULTIBOARD Datasheet
Digiboard - Transimpedance Amplifier Board
Versatile 2-channel current to voltage converting amplifier, one analog and one digital output
Digiboard Datasheet
AMPCON_LO - Low sensitivity transmitter of photocurrent to 4-20mA current loop
Transmitter (current amplifier) with output current of 4-20mA to include photodiodes into an industrial 4-20 mA data bus
maximum photocurrent: 250μAAMPCON_LO Datasheet
AMPCON_MED - Medium sensitivity transmitter of photocurrent to 4-20mA current loop
Transmitter (current amplifier) with output current of 4-20mA to include photodiodes into an industrial 4-20 mA data bus
maximum photocurrent: 2,5μAAMPCON_MED Datasheet
AMPCON_HI - High sensitivity transmitter of photocurrent to 4-20mA current loop
Transmitter (current amplifier) with output current of 4-20mA to include photodiodes into an industrial 4-20 mA data bus
maximum photocurrent: 18nAAMPCON_HI Datasheet
VOLTCON_LO - Low sensitivity transmitter of photocurrent to a 0-5V signal
Voltage amplifier, conversion of photocurrent into a 0-5V output signal
maximum photocurrent: 500μAVOLTCON_LO Datasheet
VOLTCON_MED - Medium sensitivity transmitter of photocurrent to a 0-5V signal
Voltage amplifier, conversion of photocurrent into a 0-5V output signal
maximum photocurrent: 5μAVOLTCON_MED Datasheet
VOLTCON_HI - High sensitivity transmitter of photocurrent to a 0-5V signal
Voltage amplifier, conversion of photocurrent into a 0-5V output signal
maximum photocurrent: 40nAVOLTCON_HI Datasheet
PHOTODIODE AMPLIFIER : REFERENCE STANDARD - with traceable calibration
