駿融企業-固態繼電器、大電流繼電器、磁簧繼電器、磁簧開關、浮球開關、滾球開關、震動開關、角度開關、各種水銀 傾斜開關、溫度開關、編碼器、 NTC / PTC 熱敏電阻、金屬化塑膠膜電阻、金屬化聚丙烯電容、直流馬達 及控制器、扭力感測器、壓力感測器、防火電阻、繞線電阻、水泥電阻、鋁殼電阻、電容器二極體、防火電阻、繞線電阻、水泥電阻、鋁殼電阻、超級精密電阻、高級精密電阻、精密功率電阻、數位電表校正電阻、溫度感測器電阻、精密感測器電阻、客製化感測器電阻、Balco溫度感測器電阻、分流器電阻、精密功率分流器電阻、溫度補償感測器電阻等等 …
Home | Sensor | Switch | Relay | Capacitor | Encoder & Controller & LED Light & Other | About Us | Contact Us

UV Sensors (Analog)

UV Sensors (Analog) 紫外線探針接頭感測器(類比)
  • various housings for different industrial applications
  • UV broadband, UVA, UVB, UVC, Erythema or blue light measurement
  • software based calibration, integrated microcontroller
  • UV Sensor Probe Catalogue Download
 
Step 1: Selection of Probe Mechanical Design

“UV-Surface” - Standard surface-mount 180o FOV UV Sensor
The sensor UV-Surface is a cosine corrected sensor to be used for industrial or scientific UV radiation measurements of radiation arriving at a surface, horizontal or vertical or any other orientation. On request it is also available in a submersible version. Available calibrated (NIST or PTB traceable) on request.
UV-Surface datasheet

“UV-Cosine” - Waterproof UV Sensor for outdoor use
The sensor UV-Cosine is an outdoor cosine corrected waterproof sensor (IP68 at window side, IP65 at plug side, or, on request IP68 for submerge applications). The PTFE housing is stain repellent. Available calibrated (NIST or PTB traceable) on request.
UV-Cosine datasheet

“UV-Air” - Standard axis oriented in-chamber UV Sensor
The sensor UV-Air is a cosine corrected axial looking UV sensor with a male thread (M22x1,5) with many mounting possibilities inside UV radiation chambers. Available calibrated (NIST or PTB traceable) on request.
UV-Air datasheet

“UV-Water” - 10 bar waterprooof UV Sensor
The sensor UV-Water is a waterproof (10 bar or 150ps) UV sensor to be included into pressurized water systems (G1/4” thread). This UV sensor is suited for use in food and beverages machinery. On request it is also available in a submersible version. Available calibrated (NIST or PTB tracelable) on request.
UV-Water datasheet

“UV-Water-G3/4” - 10 bar water pressure proof UV sensor with G3/4”thread
The sensor UV-Water-G3/4 is a water proof (10 bar or 150 psi) UV sensor to be included into pressurized water systems (G3/4”thread). This UV sensor is suited for use in food and beverages machinery. Available calibrated (NIST or PTB traceable) on request.
UV-Water G3/4”datasheet

“UV-DVGW” - UV Sensor for DVGW certified water purifiers
The sensor UV-DVGW is a special type suitable for use with DVGW certified water purifiers. It complies with the standard DVGW W294-3(2006). Always delivered calibrated according to DVGW requirements. (Minimum order quantity 15 pieces)
UV-DVGW datasheet

“UV-DVGW-160”- UV Sensor for DVGW (160°) and OE-Norm certified water purifiers
The sensor UV-DVGW-160 is a special type suitable for use with DVGW and OE-Norm certified water purifiers. It complies with the standard DVGW W294-3(2006) and OE-Norm 5873-2. Always delivered calibrated according to DVGW and OE-Norm requirements. (Minimum order quantity 15 pieces)
UV-DVGW-160 datasheet

“UV-Minilog” - UV Datalogger with PC Software
The sensor UV-Minilog is a battery powered UV datalogger with a large internal data storage (2 million readings). It can log data for up to 18 months without recharging. It is IP67 waterproof and comes with free PC software. The UV-Minilog can be equipped with all UV sensors to be selected at configuration guide. Available calibrated (NIST or PTB traceable) on request.
UV-Minilog datasheet

“TOCON-probe” - Pre-amplified UV Photodetector with housing
The sensor TOCON-probe is a pre-amplified UV Photodiode inside a robust stainless steel M12x1 thread body. It is configured with an integrated sensor connector (Binder 5-Pin plug) and comes with 2m connector cable. The sensor is easy to mount and connect (only with voltage output available).
TOCON-probe datasheet

“UV-Cure” - Sensor for high UV-Irradiation with integrated temperature sensor
The sensor UV-Cure is an axial looking UV sensor for measurement of high UV radiation at high temperatures (up to 170°C) in curing and drying processes. It has an integrated temperature sensor and a diffuser of radiation hard and temperature resistant microporous silica glass. A male thread (M22x1,5) allows many mounting possibilities inside UV radiation chambers. Available calibrated (NIST or PTB traceable) on request. Only available with photocurrent output.
UV-Cure datasheet
 
Step 2: Selection of Spectral Sensitivity
  • UV Broadband
  • UVA
  • UVB/UV-Index
  • UVC
 
Step 3: Selection of The Signal Output
  • 0....5V
  • 4....20mA
  • USB
  • Output for flash measurements
    configure the sensor with an adjustable level output for flash measurements
    Datasheet
 
Step 4: Selection of The Intensity Range
  • 1nW/cm2...10μW/cm2
  • 10μW/cm2...100mW/cm2
  • 100mW/cm2...10W/cm2
 
Step 5: Selection of The Connector
  • Cable
    configure the sensor with a 2m shielded cable
  • Plug
    configure the sensor with a male 5pin plug; a 2m cable is provided
  • Submersible
    configure the sensor to be submersible
 
-------Accessories-----
  • Measurement Window WIN294
    Measurement window for certified UV sensors according to DVGW 294-3 and ONORM M5873
    (minimum order quantity 15 pieces) Datasheet
  • Temperature sensor
    PT100 sensor integrated into the probe housing
 
 
         

name
Company
Address
Country
Tel
Fax
Email
Question kind
Question
or
Suggestion
 

 
Address:4F-3. No.171. Sec.2. Chang An.E.Rd. Taipei. Taiwan. R.O.C.
Tel:886-2-27111093~5
Fax:886-2-27310902

 


 




駿融企業有限公司 版權所有 © 2012 JIN ZON ENTERPRISE CO., LTD. All Rights Reserved.
TEL:886-2-2711-1093~5 FAX:886-2-2731-0902
134535