| PERFORMANCE |
|
|
| Compatible sensors |
Strain gauge transducer |
|
| Signal input terminals |
Round connector (NDIS7P)/terminal bank (connect only one at a time) |
|
| Operating temp range |
0°C to 40°C |
|
| Storage temp range |
-20°C to 60°C |
|
| Excitation |
2.5 VDC ±5% (30mA maximum current) |
|
| Signal input range |
±5 mV/V |
|
| Weight |
320 g |
Including batteries |
| D/A Output |
± 2V |
|
| A/D Conversion |
1000 times/second, 24-bit |
|
| Digital filter |
Moving average (select from OFF, 16, 32, 64, 128, 256, 512, 1024, 2048) |
|
| TEDS function |
IEEE1451.4 class 2 mix mode interface |
|
| Hold functions |
Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom) |
|
| Power supply |
4 alkaline or NiMH AA batteries USB bus power (built-in Micro-USB B connector) |
|
| Operating humidity range |
85% RH or less (without condensation) |
|
| Applicable standards |
CE marking, VCCI (Class A), FCC (Class A) |
|
| External dimensions (WxHxD) |
Approximately 85mm x 140mm x 35mm (without protrusions) |
|
| EQUIVALENT INPUT/TEDS |
|
|
| Calibration range |
0.3 mV/V - 0.5mV/V |
|
| Calibration precision |
Within 0.1% F.S. (when using a 1m standard HITEC Ø8, 6-core shielded cable with 350Ω impedance, when 5mV/V) |
|
| PRECISION |
|
|
| Non-linearity |
Within 0.01% F.S. + digit (when 5mV/V) |
|
| Zero drift |
Within 0.5μV/°C (input conversion value) |
|
| Gain drift |
0.005% / °C or less |
|
| D/A OUTPUT |
|
|
| Output connector |
BNC |
|
| Output voltage |
±2.0V |
|
| Resolution |
70.16μV typ |
|
| Non-linearity |
0.02% F.S. or less |
|
| Zero drift |
0.1mV/°C or less |
|
| Gain drift |
0.003%/°C or less |
|
| DISPLAY |
|
|
| Display |
2.4" color TFT LCD |
|
| Display modes |
Setting screens, indicator value digital display, graph display, recorded data list display, static strain display |
|
| Languages |
Japanese/English |
|
| INDICATOR VALUE |
|
|
| Display range |
-99999 to 99999 |
|
| Decimal point |
Display position selectable |
|
| DISPLAYED ITEMS |
|
|
| Calibration settings |
Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration) |
|
| Function settings |
High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, motion detect, zero tracking, digital zero, digital zero offset, zone definition |
Hold mode, control lock, minimum grid, digital zero limit, clear digital zero, select data output, D/A converter |
| Sensor value memory |
Six types of calibration values for each connected sensor |
|
| DATA RECORDING |
|
|
| Indicator value |
300 maximum. Recorded contents: ID number, date and time, recording mode, sensor value memory number, indicator value |
|
| Graph recording |
8 maximum. Recorded contents: ID number, date and time, sensor value memory number, trigger mode, grapgh waveform |
|
